Brands

The brands thatcome up here

The short answer

Whether your part is still made matters more than the name on the door. Read us the model and serial number off the sticker and we can tell you.

A technician at a freestanding range with one surface burner cap lifted off and set on the counter.

The names in most kitchens here

Whirlpool, GE, Maytag, Frigidaire, LG, Samsung, Kenmore, Amana, Hotpoint, Speed Queen and Electrolux are the names in most kitchens around here, and parts for all of them are easy to get.

A lot of these brands share parts. The same drain pump, drive motor or inlet valve turns up under two different names. And they tend to fail the same ways: LG and Samsung front loaders from the same era share a drain pump pattern, and old direct drive top loaders keep going long after the electronics that replaced them have quit.

Where the brand does change the job

Sealed system parts are made for one brand only. So is anything built in or panel ready, because the machine has to come out of the cabinet before a tech can reach anything.

Counter depth and cabinet depth models look identical and often take different doors and gaskets, which is another reason we ask for the number instead of the name.

The brands that cause real trouble are the ones whose importer changed or pulled out. That is when parts dry up. It has nothing to do with how well the machine was built.

Why we ask for the model number

A machine from ten years ago might still have a pump on the shelf and no control board anywhere. And an appliance bought as part of a package deal is not always built the same as the standalone one with the same name.

So the number off the sticker is the only thing that tells us whether your part is still made. The name on the door does not.

Questions people ask

Can I still get parts for an old appliance?

Motors, pumps, belts, switches and thermostats are all still made. The maker's own circuit boards are the risk. If the part is current, an old machine is usually worth keeping. If the part is gone, that ends the argument, not the age of the machine. Call with the numbers off the sticker. Age on its own does not settle it.

What should I have ready when I call?

The model number, what the machine is doing, and when it started. Those are the three. Keep any paperwork you have. A machine still inside the maker's warranty is handled differently. Call us and read the model number straight off the sticker.

Is it worth repairing, or should I replace it?

One repair on a machine that has never given trouble is worth doing. A third repair in two years usually is not. Saving on energy is real but slow. It rarely catches up with a repair that costs a fraction of a new unit. Have it diagnosed before you go shopping.

What makes one brand easier to repair than another?

The useful question is not the brand. It is whether the part is still in production. Sealed system parts are brand specific. That is the one place the name on the door really changes the job. Ask whether the part for your model is still available.

Is this appliance problem something I can fix myself?

Start with the power, the door switch and the filters. Those three explain a lot of dead appliances. Level the machine. A washer that bangs on the spin cycle is often just out of level or standing on a soft floor. Stop at the panel and call us.

Have the model number ready

It is the only thing that settles whether a part is still available.

(716) 414-5233
Call (716) 414-5233