Appliance repair

Dryerrepair

What goes wrong, which part it usually is, and what moves the price.

$120 to $500Typical for the part plus the labor to fit it. The part is what sets the price, so the diagnosis comes before the figure.

The short answer

Any dryer repair is two jobs: finding out what broke, and the part to fix it. Most of the time the part that failed is a cheap one, so a tech checks those first.

A technician kneeling at a white dryer with its front panel off, lifting out the long metal heating element housing.

What usually fails

  • Runs but will not heat, which is the element, the thermal fuse or the thermostat
  • Takes two cycles to dry, which is a vent problem far more often than an appliance problem
  • Squealing or rumbling, normally the drum rollers, the idler pulley or the rear bearing
  • Shuts off early, usually a moisture sensor or a restricted vent tripping the thermostat
  • Will not start at all, commonly the door switch or the start switch

The part sets the price, not the appliance and not where you live. Have the model and serial number off the sticker when you call. Two machines with the same name on the door can take different parts, and the sticker is the only thing that tells us which.

Typical ranges by part

PartTypical range
Heating elementRuns but will not heat, on an electric dryer$180 to $400
Thermal fuse or cycling thermostatCheck before the element. A blown fuse is frequently a symptom of a blocked vent rather than a fault$120 to $260
Igniter or gas valve coilThe gas dryer equivalent of a failed element$180 to $420
Drum rollers, idler pulley or beltSquealing, rumbling or thumping$180 to $400
Rear drum bearingA deeper noise than the rollers, and a longer job$250 to $500
Moisture sensorShutting off early on an auto dry cycle$140 to $300
Door switch or start switchWill not start at all$120 to $260
Blower wheelPoor airflow where the vent is already clear$180 to $380

For comparison, a replacement typically runs $650 to $1,500 installed, which is the figure to compare against rather than the shelf price.

Before you call

Where to find the model numberThe model number, the symptom in your own words, when it started, and what you have already tried.

By city

Dryer in Erie, PAThe same appliance, written for that market.

Questions people ask

What counts as urgent and what can wait?

A warm freezer gives you about a day. A squeaky dryer gives you as long as you like. A full freezer holds its cold for roughly a day with the door kept shut. A warm fridge gives you a few hours of safe food and no more. Lead with the water or the food when you call, not with the brand.

What does dryer repair usually run?

The price comes down to which part failed. Age matters through parts, not labor. A current model takes a stock part. An older one may need a part that has to be ordered in. Ask what the diagnosis found and what the part costs before you agree to it.

Can I still get parts for an old appliance?

Motors, pumps, belts, switches and thermostats are all still made. The maker's own circuit boards are the risk. A mechanical timer, a belt, a drive motor and a water valve are common parts and still widely stocked. Call us with the model and serial number and ask whether the part is still made.

What should I have ready when I call?

Find the sticker before you call. Everything else follows from the model number. Find the power and water shut offs before the appointment rather than during it. Have the numbers and the error code ready, then call.

What makes one brand easier to repair than another?

Parts for the common names are easy to get. The unusual names are the gamble. LG and Samsung front loaders from the same era share a drain pump fault, and that part is a stock item. Find the sticker and have the number ready when you call.

Is it worth repairing, or should I replace it?

A cheap part on a machine you like is an easy yes. The real exception is a machine that has already had one big part replaced and has now failed somewhere else. A diagnosis costs less than the wrong new appliance. Start there.

Other appliances

The rest of what gets fixed

Get it diagnosed

Ask for the repair price before any work starts.

(716) 414-5233
Call (716) 414-5233